Seamless gutters in Nanoose Bay

Downspout and extension costs

We install new downspouts for $7.50 to $12 a foot, or $100 to $250 per pipe assembly. Your standard four-pipe setup runs $400 to $1,000, depending on wall height and ladder setup required on sloped lots.

Mounting custom continuous gutters

We bring portable equipment directly to your residential property to roll seamless aluminum gutters. We use hidden hangers to protect your wood and keep the water flowing to the downspouts.

Scheduling your written quote

Call or text us to discuss your gutter setup in Nanoose Bay. We visit your property and give you a written price to review.

Why gutters sag and how we fix them

Gutters pull away from the roofline when heavy debris and standing water overload the metal. Old spikes work loose from the wood because winter storms push weight against the front lip of the trough. If fir needles pile up inside, rainwater cannot reach the drop outlets. The trapped water adds heavy strain to the hangers. That extra weight causes the metal to bow in the middle. When a gutter sags, water sits in the low spot instead of flowing downhill toward your downspouts. That standing pool rusts old metal and leaks over the back edge against your home.

We fix this by taking the weight off the run and checking the wood underneath. We remove loose spikes and replace them with heavy-duty hidden hangers. We drive fresh screws deep into solid framing timber so the trough stays anchored in high winds. We check the fall of the metal with a level and reset the slope from corner to downspout. Raising the low spots allows rainwater to drain freely again without pooling. If a seam or corner joint loosened while the run was sagging, we scrape away dried caulk and apply fresh sealant. We test the water flow before we pack our ladders.